800-150최신업데이트덤프자료100%유효한최신버전덤프

Itexamdump 에서는 Cisco 800-150 시험에 대비한 고품질 Cisco 800-150덤프를 제공해 드립니다. Cisco 800-150덤프는 IT 업계 종사자들에 있어서 아주 중요한 인증시험이자 인기 자격증을 취득할수 있는 필수과목입니다. Cisco 800-150시험을 합격하여 자격증을 취득하시면 취업하는데 가산점이 될수 있고 급여 인상이나 이직에도 많을 도움을 드릴수 있습니다.

Cisco인증 800-150시험을 준비하기 위해 잠도 설쳐가면서 많이 힘들죠? Itexamdump덤프가 고객님의 곁을 지켜드립니다. Itexamdump에서 제공해드리는Cisco인증 800-150덤프는 실제Cisco인증 800-150시험문제를 연구하여 만든 공부자료이기에 최고의 품질을 자랑합니다. Itexamdump덤프를 열심히 공부하여 멋진 IT전문가의 꿈을 이루세요.

>> 800-150최신 업데이트 덤프자료 <<

800-150시험합격 & 800-150적중율 높은 덤프자료

Itexamdump Cisco 800-150덤프의 질문들과 답변들은 100%의 지식 요점과 적어도 98%의Cisco 800-150시험 문제들을 커버하는 수년동안 가장 최근의Cisco 800-150 시험 요점들을 컨설팅 해 온 시니어 프로 IT 전문가들의 그룹에 의해 구축 됩니다. Cisco 800-150 시험적중율 높은 덤프로 시험패스하세요.

최신 Cisco Certified Field Technician (CCT) 800-150 무료샘플문제 (Q21-Q26):

질문 # 21
Drag and drop the network connectivity and management tools used to ensure connectivity from the left onto the description on the right.

정답：

설명：

Explanation:
* PING# Sends ICMP echo request packets to verify connectivity
* Telnet# Allows virtual terminal connections with unencrypted traffic
* SSH# Provides secure, encrypted remote access to network devices
* IP address configuration# Requires the PC and Cisco device to be in the same subnet for direct connection These tools and their functions are covered under"Device Configuration and Verification"in the FLDTEC course:
PING:Utilized to test basic networkconnectivity using ICMP echo request/reply messages. It confirms whether a device is reachable and measures the round-trip time.
Telnet:A protocol that allows for remote device access but transmits data in plaintext, which makes it insecure. It's typically disabled by default on modern Cisco devices due to security concerns.
SSH (Secure Shell):Replaces Telnet as the preferred method for secure CLI access. It encrypts the session, protecting sensitive information such as login credentials.
IP Address Configuration:For direct device access via the same local network, both the PC and the Cisco device must be in the same subnet. This allows the use of tools like browser-based GUIs or terminal emulators when connecting directly.

질문 # 22
Which common CLI command isused to install Cisco NX-OS Software?

A. install all
B. install kickstart
C. copy tftp: running-config
D. boot system

정답：A

설명：
Theinstall allcommand is the standard method used to install or upgrade Cisco NX-OS software on Nexus switches. This command streamlines the installation process by automating tasks such as verifying the software image, checking for compatibility, and managing the installation of optional packages or SMUs (Software Maintenance Upgrades). It ensures a comprehensive and efficient upgrade process, minimizing the potential for errors.Cisco In contrast:
* copy tftp: running-configis used to copy configuration files, not software images.
* install kickstartis an outdated command from earlier NX-OS versions.
* boot systemsets the boot variable but does not handle the full installation process.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco IOS Software Basics

질문 # 23
Drag and drop the Cisco NX-OS components from the left onto the corresponding descriptions on the right.

정답：

설명：

Explanation:
* Kickstart Image# Specialized bootloader that initializes the hardware
* System Image# Contains the full NX-OS kernel and operating system
* Global configuration command mode# Provides access to the broadest range of commands that affect the device as a whole
* EXEC command mode# Allows for displaying device status and configuration information This knowledge is covered underCisco IOS/NX-OS Software Basicsin the FLDTEC training:
* Kickstart Image:Alightweight bootloader image that initializes hardware and launches the system image. It's comparable to ROMMON in traditional IOS devices.
* System Image:Includes the full NX-OS operating system, services, drivers, and kernel required to run the device.
* Global Configuration Mode:After entering privileged EXEC mode (enable), this mode allows changes to system-wide settings such as interfaces, routing protocols, and VLANs.
* EXEC Mode:Has two levels-User EXECandPrivileged EXEC. User EXEC provides limited diagnostic commands, while Privileged EXEC allows more extensive system views (show commands, reload, etc.).
Understanding these layers is essential when maintaining or restoring NX-OS devices in field environments.

질문 # 24
Drag and drop the steps of the boot sequence process of a Cisco device into order on the right.

정답：

설명：

Explanation:
Step 1 # Performs power-on self-test (POST)
Step 2 # Loads and runs bootstrap code (firmware)
Step 3 # Finds and loads the Cisco IOS software
Step 4 # Finds and loads the configuration
Step 5 # Runs the configured Cisco IOS software
This startup process is thoroughly described in theFLDTECcourse and alignswith Cisco's standard IOS boot process:
* POST (Power-On Self-Test):Verifies hardware functionality including memory and interfaces. This occurs immediately upon powering the device.
* Bootstrap Code Execution:Bootstrap is a small program in ROM that initiates the boot process.
* Cisco IOS Loading:Bootstrap locates and loads the IOS from flash memory or another source (e.g., TFTP).
* Configuration Loading:The router then loads the startup-config from NVRAM (if available).
* IOS Execution:Once the configuration is loaded, the device enters operational mode and executes the IOS with the loaded config.
This sequence is vital for field technicians to understand for troubleshooting boot failures or performing device recoveries.

질문 # 25
Which two cloud computing services are vendor-managed in an Infrastructure as a Service (IaaS) delivery model? (Choose two.)

A. Operating System
B. Applications
C. Networking
D. Storage
E. Data

정답：C,D

설명：
In theInfrastructure as a Service (IaaS)model, the cloud provider is responsible for managing and maintaining the underlying infrastructure components, including:
* Networking: The cloud provider handles all aspects of network configuration, hardware, and virtual networking.
* Storage: The cloud provider supplies and manages the physical and virtual storage infrastructure required to support the consumer's data needs.
The customer is responsible for managing:
* Operating Systems
* Applications
* Data
This model offers flexibility while shifting infrastructure maintenance responsibilities to the service provider.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Licensing and Smart Licensing

질문 # 26
......

Cisco인증800-150시험준비를 하고 계시다면Itexamdump에서 출시한Cisco인증800-150덤프를 제일 먼저 추천해드리고 싶습니다. Itexamdump제품은 여러분들이 제일 간편한 방법으로 시험에서 고득점을 받을수 있도록 도와드리는 시험동반자입니다. Cisco인증800-150시험패는Itexamdump제품으로 고고고!

800-150시험합격: https://www.itexamdump.com/800-150.html

800-150시험을 빨리 패스해야 되는데 어디서부터 어떻게 시험준비를 시작해야 하는지 갈피를 잡을수 없는 분들은 저희 사이트를 주목해주세요, Cisco 800-150인증시험 패스가 어렵다한들 저희 덤프만 있으면 패스도 간단한 일로 변경됩니다, Cisco 800-150최신 업데이트 덤프자료 아마 많은 유사한 사이트들도 많습니다, Itexamdump에서Cisco 800-150시험덤프를 구입하시면 퍼펙트한 구매후 서비스를 제공해드립니다, Itexamdump 800-150시험합격의 자료는 시험대비최고의 덤프로 시험패스는 문제없습니다, Cisco 800-150최신 업데이트 덤프자료 높은 적중율에 비해 너무 착한 가격.

온갖 먼지로 뒤범벅이 된 무진, 언니가 경찰서에 잡혀 있었을 때, 가장 먼저 실장님을 찾았어요, 800-150시험을 빨리 패스해야 되는데 어디서부터 어떻게 시험준비를 시작해야 하는지 갈피를 잡을수 없는 분들은 저희 사이트를 주목해주세요.